RIGGING RESOURCE CENTER / FIELD RECORD

Rigging equipment use and inspection log

A free browser tool for riggers, crews, and equipment yards. Record use hours and inspection notes for slings, rope, chain, shackles, and other rigging equipment, then export the entries as a CSV. It is a record-keeping aid, not a compliance document, and nothing you enter is uploaded.

Record an equipment-use entry
Record hours and inspection notes for one item and one date.

Copy it from the tag or manufacturer record.

Enter time in use for this lift, task, or shift.

Record only what the responsible inspector documented.

No entries yet. Entries stay in this browser tab until you export them.

Use and inspection records
Recorded totals are grouped by the asset ID entered above.

Added records will appear here for review and export.

Records are not a service-life or safety rating.

Use hours do not determine whether equipment is safe to use. Follow the applicable inspection program and manufacturer criteria. Remove defective equipment from service. This builder does not save entries to the site; export the CSV to retain a record.

What to record
The CSV columns follow this list. For the full explanation, read rigging service records.
  • Asset ID or tag
  • Equipment type
  • Rated capacity
  • Date placed in service
  • Inspector
  • Condition
  • Use hours
  • Defects found
  • Action taken, including removal from service
Example only. This row is not included in your export.
Asset IDTypeRated capacityIn serviceInspectorDateHoursDefectsAction
SL-014Synthetic web slingPer tag2026-03-02J. Smith2026-11-053.5Edge abrasion notedTagged out for review

Check the references that apply to your work: OSHA 29 CFR 1910.184 for slings, and ASME B30.9 for slings in the applicable work context. This page states no inspection interval and no pass or fail criterion.

Use hours support the record; they do not set service life
Inspection and removal decisions remain tied to the applicable rules and manufacturer instructions.

A use log is not a safety certification. OSHA inspection schedules vary by equipment type and work context. For example, the alloy-steel chain-sling interval in the federal general-industry rule must not be applied to every sling or fitting. Confirm the current Washington and federal requirements for the task.

Entries stay in the current browser tab and are not uploaded to the site. Download the CSV to retain a record. The tool does not determine whether equipment is fit for service.