The site access survey: 12 questions before a vault installation
A successful site review starts with the complete path from delivery point to final location. This checklist helps a project team collect useful facts before quoting or selecting a method; it does not replace a site visit or a structural review.
Start with the equipment and destination
Identify the make, model, shipping configuration, and intended final position. Confirm dimensions and weight from a current manufacturer document or other reliable project record. Note accessories, pallets, packaging, or changes that may alter the dimensions or total load.
Ask who can authorize access, receive the delivery, provide building drawings, and approve work near secure areas. Confirm operating hours, delivery windows, staging limits, and any building-specific contractor requirements early.
- What is the exact equipment identity and configuration?
- Are weight, dimensions, center-of-gravity details, and handling points documented?
- Who is the building contact for access, drawings, and approvals?
Measure every transition along the route
Record clear opening width and height, door swing, corridor width, turning space, overhead obstructions, thresholds, slopes, and floor transitions. Include the dimensions of the equipment in its delivery configuration and the space needed to maneuver it; a nominal door size alone does not answer whether the route works.
For elevators, collect the posted load limit, car and door dimensions, sill and approach conditions, and any building rules for reserving or protecting the car. For stairs, record widths, landings, turns, headroom, and the stair construction if known. Measurements support review but do not establish structural capacity.
Separate known facts from assumptions
Ask the property owner or structural engineer for relevant floor, stair, elevator, and anchorage information. A finish type or a visible slab thickness is not a structural rating. If a route depends on unknown building capacity, list that as an unresolved decision and assign it to the responsible professional.
Use the companion printable worksheet to capture the twelve topics in one place. Keep drawings, photographs, measurements, and approvals with the project record, and update them if the route or equipment changes.
- Building drawings or written capacity information from an authorized source.
- Delivery access, staging area, loading-zone constraints, and overhead conditions.
- Permit, landlord, elevator, security, and work-hour questions with an assigned owner.
References and further reading
Rules apply to specific work contexts. Confirm the current requirements for the job, equipment, and jurisdiction.
